Reply to thread

Message: <blockquote data-quote="1aespinoza" data-source="post: 8722694" data-attributes="member: 654802"><p>Check all power connections. Clean and tighten all connection points, refreshing contact points is always a plus even if you switch the amp out. Before all that, I would connect the amp next to the battery to see if it stays on. Neg to neg, pos to pos, and a short wire from pos screw to remote screw to turn it on. If it stays on, the likely culprit is your wires/fuse.</p></blockquote><p></p>

Top