Reply to thread

Message

<blockquote data-quote="keep_hope_alive" data-source="post: 8251804" data-attributes="member: 576029">it is possible the woofers still work - wire them without the crossovers.&nbsp; only the tweeters NEED crossovers.the crossovers are more likely to fail or the amp can go into protect due to moisture.never mount crossovers inside doors.&nbsp; mount them on the surface of the door behind the panel so they stay dry.&nbsp; you can use weatherstripping foam to create an upside down &quot;U&quot; above the woofer to direct water away from the speakers.&nbsp; &quot;Marine rated&quot; is only for the cone and surround.i&#039;ve done this for door components where the crossovers had tweeter level adjustments that wanted to be accessible.2005 Elantra GT with Type-R components<img src="http://cdn2.caraudio.com/3/5/4/4/9/dansdoor02.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://cdn2.caraudio.com/3/5/4/4/9/dansdoor01.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />otherwise, the best location is back by the amps so they are accessible and dry.</blockquote>

[QUOTE="keep_hope_alive, post: 8251804, member: 576029"] it is possible the woofers still work - wire them without the crossovers. only the tweeters NEED crossovers. the crossovers are more likely to fail or the amp can go into protect due to moisture. never mount crossovers inside doors. mount them on the surface of the door behind the panel so they stay dry. you can use weatherstripping foam to create an upside down "U" above the woofer to direct water away from the speakers. "Marine rated" is only for the cone and surround. i've done this for door components where the crossovers had tweeter level adjustments that wanted to be accessible. 2005 Elantra GT with Type-R components [IMG]http://cdn2.caraudio.com/3/5/4/4/9/dansdoor02.jpg[/IMG] [IMG]http://cdn2.caraudio.com/3/5/4/4/9/dansdoor01.jpg[/IMG] otherwise, the best location is back by the amps so they are accessible and dry. [/QUOTE]

Verification