Reply to thread

Message

<blockquote data-quote="hempy" data-source="post: 2941574" data-attributes="member: 571956">Well, I reached a stopping point on the face/back.&nbsp; The screw holes came out really good, but I&#039;m not really happy with the back.&nbsp; I would feel the same about the front, but as of now all of my cuts are covered up.&nbsp; I may try to find someone with a small cnc machine since companies charge way too much for custom fabrication.&nbsp; I countersunk the holes and cleaned up the cutouts up to 1500 grit.My PE order shipped today so the cables should be in sometime this week.&nbsp; In the meantime I will be getting them ready for paint.&nbsp; Cleaning up the sides cut away a good bit of the roundover again, so I may pass over it with the router again or I may just hand snad.&nbsp; There are some spots that could use some bondo as well.I am having trouble trying to figure out the polarity of the outputs on the amp.&nbsp; I have one that is wired to a 3.5mm plug and another that is just a 2-prong plug.&nbsp; I need to find out, first, how which is which on the plug, and secondly, how the left output is wired to the 3.5 plug (tip, middle, sleeve) so I can wire up the right 3.5 plug that I added.&nbsp; Is there any way to do this with a dmm or a pair of other speakers?&nbsp; Is there a way to create a file of a one-way &quot;pop&quot; so that I can maybe check the phase?Oh well, time will tell.&nbsp; Here are new pix.&nbsp; I testfit everything and it all seems to fit well.<img src="http://i24.photobucket.com/albums/c21/hempness/0008.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i24.photobucket.com/albums/c21/hempness/0009.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i24.photobucket.com/albums/c21/hempness/0010.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i24.photobucket.com/albums/c21/hempness/0011.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i24.photobucket.com/albums/c21/hempness/0012.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="hempy, post: 2941574, member: 571956"] Well, I reached a stopping point on the face/back. The screw holes came out really good, but I'm not really happy with the back. I would feel the same about the front, but as of now all of my cuts are covered up. I may try to find someone with a small cnc machine since companies charge way too much for custom fabrication. I countersunk the holes and cleaned up the cutouts up to 1500 grit. My PE order shipped today so the cables should be in sometime this week. In the meantime I will be getting them ready for paint. Cleaning up the sides cut away a good bit of the roundover again, so I may pass over it with the router again or I may just hand snad. There are some spots that could use some bondo as well. I am having trouble trying to figure out the polarity of the outputs on the amp. I have one that is wired to a 3.5mm plug and another that is just a 2-prong plug. I need to find out, first, how which is which on the plug, and secondly, how the left output is wired to the 3.5 plug (tip, middle, sleeve) so I can wire up the right 3.5 plug that I added. Is there any way to do this with a dmm or a pair of other speakers? Is there a way to create a file of a one-way "pop" so that I can maybe check the phase? Oh well, time will tell. Here are new pix. I testfit everything and it all seems to fit well. [IMG]http://i24.photobucket.com/albums/c21/hempness/0008.jpg[/IMG] [IMG]http://i24.photobucket.com/albums/c21/hempness/0009.jpg[/IMG] [IMG]http://i24.photobucket.com/albums/c21/hempness/0010.jpg[/IMG] [IMG]http://i24.photobucket.com/albums/c21/hempness/0011.jpg[/IMG] [IMG]http://i24.photobucket.com/albums/c21/hempness/0012.jpg[/IMG] [/QUOTE]

Verification