Reply to thread

Message

<blockquote data-quote="headless" data-source="post: 5344530" data-attributes="member: 566363">Your major problem isn&#039;t that the box is too big.&nbsp; Regardless of box size, your sub isn&#039;t supposed to play above 80hz.&nbsp; Likewise, your mids should play down to that frequency but not much lower.&nbsp; To get those results, your high pass filter for your fronts should be OFF on either the deck or the amp, and then set to 80hz on whichever you leave on.&nbsp; Your low pass filter for your sub should be OFF on either the deck or the amp, and set to 80hz on whichever you leave on.&nbsp; 125hz or 200hz either one is too high for either low or high pass filters for your setup.&nbsp; 100hz would be as low/high as i would cross a sub or front midbass&#039;s over.&nbsp; 80hz is a more realistic LP crossover setting for a sub... my old setup had both my fronts and my sub crossed over @ 63hz, though your front speakers will probably not get that low.&nbsp; Thus 80hz for both your sub and fronts crossover point.&nbsp; ONE 80hz filter on each.The way you have things set right now is ****ed.</blockquote>

[QUOTE="headless, post: 5344530, member: 566363"] Your major problem isn't that the box is too big. Regardless of box size, your sub isn't supposed to play above 80hz. Likewise, your mids should play down to that frequency but not much lower. To get those results, your high pass filter for your fronts should be OFF on either the deck or the amp, and then set to 80hz on whichever you leave on. Your low pass filter for your sub should be OFF on either the deck or the amp, and set to 80hz on whichever you leave on. 125hz or 200hz either one is too high for either low or high pass filters for your setup. 100hz would be as low/high as i would cross a sub or front midbass's over. 80hz is a more realistic LP crossover setting for a sub... my old setup had both my fronts and my sub crossed over @ 63hz, though your front speakers will probably not get that low. Thus 80hz for both your sub and fronts crossover point. ONE 80hz filter on each. The way you have things set right now is ****ed. [/QUOTE]

Verification