Reply to thread

Message: <blockquote data-quote="bigslim" data-source="post: 2995376" data-attributes="member: 567488">I'm looking to make an amp rack that will hang the amp in the air solely by metal brackets hung from the bottom of the rear dashboard (space purposes).What's my best bet as far as using a metal that is both easy to work with (these brackets will require at least two 90 degree bends) and strong enough to hold the weight of the amp?  It's a four channel amp, so it's not the lightest.  I have looked at Menard's for metal strips to use, but only came up with a piece used for vent work.  It wasn't bad for the application I was using at that time, but it wasn't easy to bend and I don't have a metal press to bend it.Thanks for any suggestions.</blockquote>

Top