Reply to thread

Message

<blockquote data-quote="momax_powers" data-source="post: 8040297" data-attributes="member: 643054">i tried hookin up my B2 AS12 mkii D2 to the 1000/1v2 @ 4 ohms but when i start the car both the green power led and the yellow low ohm led stay on. Theres no output (also no buzzing or hum like some people get in the same situation). Ohm light stays on even when sub is not connected. Voltage is fine, both ground and power are fine, gain is set conservatively, coils in series read 4.2. Only conclusion is maybe an internal short so i opened it up and took some pics. All the fets look fine, resistors look fine, no burning smell, although everything i know about amp circuit boards can fit in a thimble so maybe someone call take a look and point out anything that may be of concern...<img src="http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1464_zps9ce15801.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1465_zps538e9fb9.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1466_zpsdff286ba.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1469_zps5481ca30.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1471_zpsb07c9ae3.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="momax_powers, post: 8040297, member: 643054"] i tried hookin up my B2 AS12 mkii D2 to the 1000/1v2 @ 4 ohms but when i start the car both the green power led and the yellow low ohm led stay on. Theres no output (also no buzzing or hum like some people get in the same situation). Ohm light stays on even when sub is not connected. Voltage is fine, both ground and power are fine, gain is set conservatively, coils in series read 4.2. Only conclusion is maybe an internal short so i opened it up and took some pics. All the fets look fine, resistors look fine, no burning smell, although everything i know about amp circuit boards can fit in a thimble so maybe someone call take a look and point out anything that may be of concern... [IMG]http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1464_zps9ce15801.jpg[/IMG] [IMG]http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1465_zps538e9fb9.jpg[/IMG] [IMG]http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1466_zpsdff286ba.jpg[/IMG] [IMG]http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1469_zps5481ca30.jpg[/IMG] [IMG]http://i1358.photobucket.com/albums/q773/momax_powers/IMG_1471_zpsb07c9ae3.jpg[/IMG] [/QUOTE]

Verification