Reply to thread

Message: <blockquote data-quote="yogegoy" data-source="post: 8277826" data-attributes="member: 659113"><p>Did you clean the inside bore of the mounting bolts and the bolt itself with spiral wire brush and placed batt red stuff in it? Every mating surface should have a clean metal surface, same thing goes with the 1/0 neg cable to the mounting bracket. Help your connections getting too much resistance, clean bare metal mating and clamp it tight (hand tight plus 90*). My 370A Mechman is just wonderful at every engine speed, always giving me a healthy dose of 14.6V and 13.8V at idle. If you can solder the pos and neg cables to your battery terminals (and all terminals) you'd see a big improvement specially in the mechanical noise in the system.</p></blockquote><p></p>

Top