Reply to thread

Message

<blockquote data-quote="Gauntlet" data-source="post: 206218" data-attributes="member: 545529">So.......the component speakers have no outboard crossover? You should have 2 of these, it has 2 sets of inputs (one for the driver, and one for the tweeter), and then one set of outputs to go to the amp/HU. Ask whoever installed it if you are supposed to have these, and what the deal is. You paid good $$ to have an installation properly done, I&#039;d hold them 110% accountable and make them figure out the problem and correct it. You should not be forced to search online for answers when you paid $$ to have it done correctly. Bit*h your *** off at them.And you got ripped off on the dynamat....80$ per door for 4 square feet is absolutely ridiculous. I paid 50$ for 50 sq feet of Second Skin which functions exactly the same as dynamat....but I digress. If the material is coming off and barely sticking on, then they did not clean the mounting surface properly. So basically, it&#039;s a waste. Sound deadening material only does its job when its mounted completely flush and secure to the contours of the metal. I&#039;d complain and demand that they do it again, for free, and this time they clean the mounting surface.And off the record....this is just another example of why I refuse to let anyone install something besides me.</blockquote>

[QUOTE="Gauntlet, post: 206218, member: 545529"] So.......the component speakers have no outboard crossover? You should have 2 of these, it has 2 sets of inputs (one for the driver, and one for the tweeter), and then one set of outputs to go to the amp/HU. Ask whoever installed it if you are supposed to have these, and what the deal is. You paid good $$ to have an installation properly done, I'd hold them 110% accountable and make them figure out the problem and correct it. You should not be forced to search online for answers when you paid $$ to have it done correctly. Bit*h your *** off at them. And you got ripped off on the dynamat....80$ per door for 4 square feet is absolutely ridiculous. I paid 50$ for 50 sq feet of Second Skin which functions exactly the same as dynamat....but I digress. If the material is coming off and barely sticking on, then they did not clean the mounting surface properly. So basically, it's a waste. Sound deadening material only does its job when its mounted completely flush and secure to the contours of the metal. I'd complain and demand that they do it again, for free, and this time they clean the mounting surface. And off the record....this is just another example of why I refuse to let anyone install something besides me. [/QUOTE]

Verification