Reply to thread

Message

<blockquote data-quote="Twistid" data-source="post: 4982340" data-attributes="member: 555101">I have a mach 5 spl 12&quot; ... It gets ok loud... we metered it with just (2) SAZ1500&#039;s and with both wired to .5 it was only 1.X db louder than just 1 @ 1ohm, this was with no tuning and with a quick reference of 52 hz , we have a new box built to Mach 5 specs (3 cubes) with 2 4&quot; aero ports and it seems quite louder to the ear although its nearly the same on the meter compared to my old box... this was with full port&#039;s&nbsp; however, none trimmed, so I can only assume its tuned lowwww... once we trim the ports up to mid 40&#039;s we will see what numbers it can put out...edit:: Anything over 1500 rms daily is useless, I&#039;ve been using single amp setup for about a week now and its nice, I&#039;m most likely going to start a thread with pics of setup + numbers but only after the box is completly done (router edges + sand down corners) and we squeeze the most deebeez</blockquote>

[QUOTE="Twistid, post: 4982340, member: 555101"] I have a mach 5 spl 12" ... It gets ok loud... we metered it with just (2) SAZ1500's and with both wired to .5 it was only 1.X db louder than just 1 @ 1ohm, this was with no tuning and with a quick reference of 52 hz , we have a new box built to Mach 5 specs (3 cubes) with 2 4" aero ports and it seems quite louder to the ear although its nearly the same on the meter compared to my old box... this was with full port's however, none trimmed, so I can only assume its tuned lowwww... once we trim the ports up to mid 40's we will see what numbers it can put out... edit:: Anything over 1500 rms daily is useless, I've been using single amp setup for about a week now and its nice, I'm most likely going to start a thread with pics of setup + numbers but only after the box is completly done (router edges + sand down corners) and we squeeze the most deebeez [/QUOTE]

Verification