Reply to thread

Message: <blockquote data-quote="snoopdan" data-source="post: 3060149" data-attributes="member: 564991"><p>It would prob push those RSD's just fine.   They're "ok" amps....they're an Anaba group product which is the same motherboards as Visonik and a couple of other mid grade brands that I cant remember at the moment.   They are all notoriously current hogs, so do the big three at the least if not plan for a extra battery later on.    It will put out about 1000 watts at 12ish volts....you wont stay at 13.5 long enough to make any difference though.    I also suggest putting a relay on the remote wire, and supply the large amperage lead (I cant remember the designation number on a bosch for it, sorry) with a power lead straight from the battery.   HK motherboards are notorious for shutting down when the remote power lead goes below 11 volts.</p></blockquote><p></p>

Top