Reply to thread

Message: <blockquote data-quote="Doxquzme" data-source="post: 8875823" data-attributes="member: 689267">So you have an 800 watt sub (1600 is  a peak spec, ignore it) the SVR-10 - 800 RMS dual 2VC ohm wired in parallel for a 1 ohm load paired with an 800 watt amp. Seems like a decent enough configuration.I wasn't saying the there is a problem with the LC2i only pointing out that it has a pretty high fixed subsonic filter. The amp has a filter too, turn the amplifiers subsonic filter all the way to the left.From what you describe, sounds like the amp is may be getting  starved so it goes into protect. That would mean that you're dropping quite a bit.12.8 is about 1V shy of where I would think it should be. How is it wired up? What gauge +/- wire and how long? Is the ground sanded down to bare metal?Have you pulled the sub out to check that both coils are working at that one of them may be toast?</blockquote>

Top