Reply to thread

Message

<blockquote data-quote="bones22" data-source="post: 4945746" data-attributes="member: 574597">alright guys my CMASS UL 12&#039;s should be here tomorrowright now at the top of the list for performance and cost are 2 Sundown 1500D&#039;sjust wanting to see if there are any other suggestionswanting to put 2000-2500 on each$300-400 eachanyone who doesnt know the specs here they areSubwoofer Size: 12”RMS Power handling: 2500 Watts (undistorted power)Peak Power handling: 5000 WattsRecommended Box Volume: 1.2 cuft. (Sealed)Weight: 16.6 lbsMotor Type: Dual Gap / Internal NEO MagnetVoice Coil Type: Ultra-High Temp Dual Coil (Made in the USA)Voice Coil Diameter: 3”Voice Coil Impedance: 1.5 ohm nominal per coilXmax (one-way linear excursion): 36 mm (3” peak-to-peak)Maximum Excursion (one way): 46 mm (Almost 4” peak-to-peak)Sensitivity: 96.7 db (2.83V / 1m) (coils in parallel)Fs (Klipple-LSI): 31 HzQts (Klipple-LSI): 0.81Vas (Klipple-LSI): 47.7 Liters</blockquote>

[QUOTE="bones22, post: 4945746, member: 574597"] alright guys my CMASS UL 12's should be here tomorrow right now at the top of the list for performance and cost are 2 Sundown 1500D's just wanting to see if there are any other suggestions wanting to put 2000-2500 on each $300-400 each anyone who doesnt know the specs here they are Subwoofer Size: 12” RMS Power handling: 2500 Watts (undistorted power) Peak Power handling: 5000 Watts Recommended Box Volume: 1.2 cuft. (Sealed) Weight: 16.6 lbs Motor Type: Dual Gap / Internal NEO Magnet Voice Coil Type: Ultra-High Temp Dual Coil (Made in the USA) Voice Coil Diameter: 3” Voice Coil Impedance: 1.5 ohm nominal per coil Xmax (one-way linear excursion): 36 mm (3” peak-to-peak) Maximum Excursion (one way): 46 mm (Almost 4” peak-to-peak) Sensitivity: 96.7 db (2.83V / 1m) (coils in parallel) Fs (Klipple-LSI): 31 Hz Qts (Klipple-LSI): 0.81 Vas (Klipple-LSI): 47.7 Liters [/QUOTE]

Verification