Reply to thread

Message

<blockquote data-quote="nastety92" data-source="post: 8484498" data-attributes="member: 669285">Hello all,My name is Nick and this is one of my first post on this forum.&nbsp; I use to be much more into car audio before kids and a house.&nbsp; I&#039;m looking to put a small system in a 2003 Yukon that I just purchased.&nbsp; To start I would like to just add a 10&quot; sub and keep the Bose setup.&nbsp; I&#039;m trying to find a sub that will work in a sealed enclosure and will work with the amp that I have left over from another vehicle.The amp is an Alpine MRD-F752.&nbsp; I actually have two of these, one us used and one is brand new in box from around 1999-2000.Here are the amp&#039;s specs.5 Channel class T AmplifierRMS power Channels 1-4 at 12V, 20Hz ∼ 20kHz:4 x 75W @ 4 ohms (0.08% THD)4 x 100W @ 2 ohms (0.3% THD)2 x 200W @ 4 ohms bridge (0.3% THD)RMS power Channel 5 at 12V, 20Hz ∼ 20kHz:1 x 250W @ 4 ohms (12V - 0.3% THD)Freq. Response: 20Hz ∼ 20kHz (+0,-1dB)S/N Ratio: 100dBA (at rated power)Fuse: 80ADimensions: 17.9&quot; x 10.2&quot; x 2.4&quot; (46cm x 26cm x 6cm)Weight: 18.5 lb. (8.4 kg.)Thanks for the help,Nick</blockquote>

[QUOTE="nastety92, post: 8484498, member: 669285"] Hello all, My name is Nick and this is one of my first post on this forum. I use to be much more into car audio before kids and a house. I'm looking to put a small system in a 2003 Yukon that I just purchased. To start I would like to just add a 10" sub and keep the Bose setup. I'm trying to find a sub that will work in a sealed enclosure and will work with the amp that I have left over from another vehicle. The amp is an Alpine MRD-F752. I actually have two of these, one us used and one is brand new in box from around 1999-2000. Here are the amp's specs. 5 Channel class T Amplifier RMS power Channels 1-4 at 12V, 20Hz ∼ 20kHz: 4 x 75W @ 4 ohms (0.08% THD) 4 x 100W @ 2 ohms (0.3% THD) 2 x 200W @ 4 ohms bridge (0.3% THD) RMS power Channel 5 at 12V, 20Hz ∼ 20kHz: 1 x 250W @ 4 ohms (12V - 0.3% THD) Freq. Response: 20Hz ∼ 20kHz (+0,-1dB) S/N Ratio: 100dBA (at rated power) Fuse: 80A Dimensions: 17.9" x 10.2" x 2.4" (46cm x 26cm x 6cm) Weight: 18.5 lb. (8.4 kg.) Thanks for the help, Nick [/QUOTE]

Verification