Reply to thread

Message

<blockquote data-quote="rfluvinmf" data-source="post: 8508912" data-attributes="member: 621981">Alpine mrx-m240, shoot me a pm if you are interested.Here are the specs on the amp:Monoblock X-Power Series Class D Car AmplifierRMS Power Rating:4 ohms: 1500 watts x 1 chan.2 ohms: 2400 watts x 1 chan.1 ohm: 1000 watts x 1 chan.Sleek Aggressive Design w/ End CapPulse Width Modulated MOSFET power supplyWired remote bass level control includedLED power (green) and protect (red) indicatorsVariable Bass Boost (0 to +12 dB bass boost at 50 Hz)Soft start turn-onMono channel operationPreamp RCA outputs to daisy chain multiple amps3-way protection circuitry (thermal, overload, and speaker short protection)Heavy duty aluminum alloy heat-sinkNickel-plated RCA level inputsNickel-plated screw terminalsVariable low-pass filter (50-400 Hz, 24 dB/octave)Subsonic filter (5-30 Hz)Frequency response: 5-400 Hz</blockquote>

[QUOTE="rfluvinmf, post: 8508912, member: 621981"] Alpine mrx-m240, shoot me a pm if you are interested. Here are the specs on the amp: Monoblock X-Power Series Class D Car Amplifier RMS Power Rating: 4 ohms: 1500 watts x 1 chan. [B]2 ohms: 2400 watts[/B] x 1 chan. 1 ohm: 1000 watts x 1 chan. Sleek Aggressive Design w/ End Cap Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on Mono channel operation Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy duty aluminum alloy heat-sink Nickel-plated RCA level inputs Nickel-plated screw terminals Variable low-pass filter (50-400 Hz, 24 dB/octave) Subsonic filter (5-30 Hz) Frequency response: 5-400 Hz [/QUOTE]

Verification