Reply to thread

Message

<blockquote data-quote="fLiPsId3z" data-source="post: 6664582" data-attributes="member: 619117">BNIB jl audio slash v2 300 2v2 amp $200Rated Power (2 Channel Mode):&nbsp; &nbsp; &nbsp;&nbsp; 150 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)Rated Power (Bridged Mono):&nbsp; &nbsp;&nbsp; 300 W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)THD at Rated Power:S/N Ratio:&nbsp; &nbsp;&nbsp; &amp;gt;108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)Frequency Response:&nbsp; &nbsp;&nbsp; 5 Hz - 30 kHz (+0, -1dB)Damping Factor:&nbsp; &nbsp;&nbsp; &amp;gt;200 @ 4 ohm per ch. / 50 Hz&amp;gt;100 @ 2 ohm per ch. / 50 HzSlew Rate:&nbsp; &nbsp;&nbsp; ±25 V / µS @ 4 ohm per ch.Left to Right Channel Separation:&nbsp; &nbsp;&nbsp; &amp;gt;75 dB @ 1 kHzInput Range:&nbsp; &nbsp;&nbsp; Switchable from 200mV-2V RMS to 800mV-8V RMSDimensions (L x W x H):&nbsp; &nbsp;&nbsp; 13.40 in. x 9.25 in. x 2.27 in.340 mm x 235 mm x 58 mm</blockquote>

[QUOTE="fLiPsId3z, post: 6664582, member: 619117"] BNIB jl audio slash v2 300 2v2 amp $200 Rated Power (2 Channel Mode): 150 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V) Rated Power (Bridged Mono): 300 W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V) THD at Rated Power: S/N Ratio: >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) Frequency Response: 5 Hz - 30 kHz (+0, -1dB) Damping Factor: >200 @ 4 ohm per ch. / 50 Hz >100 @ 2 ohm per ch. / 50 Hz Slew Rate: ±25 V / µS @ 4 ohm per ch. Left to Right Channel Separation: >75 dB @ 1 kHz Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS Dimensions (L x W x H): 13.40 in. x 9.25 in. x 2.27 in. 340 mm x 235 mm x 58 mm [/QUOTE]

Verification