Reply to thread

Message: <blockquote data-quote="adam71" data-source="post: 3077740" data-attributes="member: 549079">Actually I believe the crossover does dictate the impedance.  That is why there are 4 ohm crossovers and 8 ohm crossovers.  THe drivers in the kicker set may very well be 4 ohm but the crossover (when used) dictates what load the amplifier sees.Otherwise if the drivers in that component set were both 4 ohm then the amplifier would be seeing a 2 ohm load.  But if the set says it is a 4 ohm set then how is this done if the xover is not doing this.??</blockquote>

Top