Reply to thread

Message: <blockquote data-quote="timaishu" data-source="post: 5696809" data-attributes="member: 601365"><p>Okay, here is what I think you should do.</p><p></p><p>You are gonna leave the factory harness alone, you wont need to cut into it all that much.</p><p></p><p>Your amp according to what I found is brideable for 380w RMS at 4ohms or 125rms x2 at 4 ohms. I'd recommend that you bride the channels.</p><p></p><p>I'll type the next bit up now. Give me another min or two.</p></blockquote><p></p>

Verification

Top

Menu