Reply to thread

Message

<blockquote data-quote="Nobody&amp;#039;s Louder" data-source="post: 5447889" data-attributes="member: 605280">Im Confused and need some help. I was wondering what you guys thought would be the best way to go. I have a JVC (I know its not the best or great) its pre-out volts is 2.5 and I am wanting to get a line driver for 40-50 dollars will spend more if need be but not by much, But the only ones I have found have been the TLD22 and the TLD66 Line drivers does anybody know of other other then PG that have good Line Drivers for around this price.But part Im confused is my current HU only has 2 channels and I have my D amp and my comp amp, I know Im using 1 channel for the d amp but for the other amp I was wondering should I use the y-splitters before the line driver and get a 6 channel Line driver, or is it safe to get a 2 channel Line Driver (which I prefer to do) such as the TLD22 and use the Y-splitters after the Line Driver? Is it safe to do this and is the 2 channel Line driver stable enough to set it up this way or will it ruin how strong the signal is to the amp?Sorry for any confusionThanks Seth</blockquote>

[QUOTE="Nobody's Louder, post: 5447889, member: 605280"] Im Confused and need some help. I was wondering what you guys thought would be the best way to go. I have a JVC (I know its not the best or great) its pre-out volts is 2.5 and I am wanting to get a line driver for 40-50 dollars will spend more if need be but not by much, But the only ones I have found have been the TLD22 and the TLD66 Line drivers does anybody know of other other then PG that have good Line Drivers for around this price. But part Im confused is my current HU only has 2 channels and I have my D amp and my comp amp, I know Im using 1 channel for the d amp but for the other amp I was wondering should I use the y-splitters before the line driver and get a 6 channel Line driver, or is it safe to get a 2 channel Line Driver (which I prefer to do) such as the TLD22 and use the Y-splitters after the Line Driver? Is it safe to do this and is the 2 channel Line driver stable enough to set it up this way or will it ruin how strong the signal is to the amp? Sorry for any confusion Thanks Seth [/QUOTE]

Verification