Reply to thread

Message: <blockquote data-quote="k_schutte" data-source="post: 6471963" data-attributes="member: 551817">I have done several for customers...they come with mounting "tabs/clips" and screws and everythign else you need.  basicaly you just screw the tabs on where you are going to mount them and then the lights themselves just "snap" into the clips.  they you wire them all up to teh box which gets 12V power as well and your done.  Doesn't get much easier, if you get the kit you will see how easy it is when it arrives.  I would say it takes me a good 30 minutes or so to install an underbody kit if I have the vehicle up on teh lift...  about an hour if you are using jack stands.</blockquote>

Top