Reply to thread

Message

<blockquote data-quote="mulisharider10" data-source="post: 1394492" data-attributes="member: 548365">it was for for remote start on my 85 toyota. to turn the ignition on with a pulse from a aux output on a (-) output alarm channel.&nbsp; i figured it out with 3 relays. Actually 4 for the whole system. One relay for where85 (- trigger)(30a12v)30&nbsp; &nbsp;&nbsp; 87(starter)86 (12v)that relay gets the starter turning, and with the same trigger from the alarm this happens____________m= middle relay&nbsp; L= Left relay R=Right relay85(-trigger)_________85(87L&amp;amp;87M)___________85(2nd - aux output)30(12v) 87(85m)___30(12v) 87(30R&amp;amp;85m)____30(87M) 87a(grd) 87 (free)86(12v)______________86(grd)_________________86(12v)the lines dont mean anything, thats just what i had to do to get the relays seperated.If u can understand that faster than the 15 minutes it took me to write it down props to u. If not, i will take a picture of actuall relays to show u how it was done.thanks for the helpZach</blockquote>

[QUOTE="mulisharider10, post: 1394492, member: 548365"] it was for for remote start on my 85 toyota. to turn the ignition on with a pulse from a aux output on a (-) output alarm channel. i figured it out with 3 relays. Actually 4 for the whole system. One relay for where 85 (- trigger) (30a12v)30 87(starter) 86 (12v) that relay gets the starter turning, and with the same trigger from the alarm this happens ____________m= middle relay L= Left relay R=Right relay 85(-trigger)_________85(87L&87M)___________85(2nd - aux output) 30(12v) 87(85m)___30(12v) 87(30R&85m)____30(87M) 87a(grd) 87 (free) 86(12v)______________86(grd)_________________86(12v) the lines dont mean anything, thats just what i had to do to get the relays seperated. If u can understand that faster than the 15 minutes it took me to write it down props to u. If not, i will take a picture of actuall relays to show u how it was done. thanks for the help Zach [/QUOTE]

Verification