Reply to thread

Message

<blockquote data-quote="L1ttlet" data-source="post: 8664943" data-attributes="member: 675617">So I  have built a few boxes now. All out of mdf. Used paint and rhino lining. They have all been built out or 5/8 mdf. I&#039;m  tired of the dust and just overall weakness of mdf even with proper bracing. My next build I&#039;m  thinking baltic birch, maple, red oak, all the same stuff and same price just different finish when stained. 54$ for 4x8 and 3/4 inch thick. I plan on resining the inside. My last cost effective is the sanded plywood and 34$ a sheet of 4x8 for 3/4 inch and ofcourse it&#039;ll have voids but still look nice when stained and can double the panels to 1.5inches thick, resin inside of box. And it should be solid as a rock for 3 10inch subs on 3600watts rms and braced with a couple 2x4s. Question, which route would be the cheapest or even which route should I  go for the most solid box. Without killing the bank. Should I  glass matt the inside of box as well? Would the sanded plywood work for 0 vibrations done 1.5inches thick and resin? What would u do with a 100$ budget for this box? All prices are local homedepot.Please help. Here are some of the builds that I  have done and already probly seen on here.[ATTACH]3533[/ATTACH][ATTACH]3534[/ATTACH][ATTACH]3535[/ATTACH][ATTACH]3536[/ATTACH][ATTACH]3537[/ATTACH]</blockquote>

[QUOTE="L1ttlet, post: 8664943, member: 675617"] So I have built a few boxes now. All out of mdf. Used paint and rhino lining. They have all been built out or 5/8 mdf. I'm tired of the dust and just overall weakness of mdf even with proper bracing. My next build I'm thinking baltic birch, maple, red oak, all the same stuff and same price just different finish when stained. 54$ for 4x8 and 3/4 inch thick. I plan on resining the inside. My last cost effective is the sanded plywood and 34$ a sheet of 4x8 for 3/4 inch and ofcourse it'll have voids but still look nice when stained and can double the panels to 1.5inches thick, resin inside of box. And it should be solid as a rock for 3 10inch subs on 3600watts rms and braced with a couple 2x4s. Question, which route would be the cheapest or even which route should I go for the most solid box. Without killing the bank. Should I glass matt the inside of box as well? Would the sanded plywood work for 0 vibrations done 1.5inches thick and resin? What would u do with a 100$ budget for this box? All prices are local homedepot. Please help. Here are some of the builds that I have done and already probly seen on here. [ATTACH]3533._xfImport[/ATTACH] [ATTACH]3534._xfImport[/ATTACH] [ATTACH]3535._xfImport[/ATTACH] [ATTACH]3536._xfImport[/ATTACH] [ATTACH]3537._xfImport[/ATTACH] [/QUOTE]

Verification