Reply to thread

Message

<blockquote data-quote="Doxquzme" data-source="post: 8876600" data-attributes="member: 689267">The amp grounding at the same place as the head unit is not an issue if the grounding point is clean and bare. This may be a function of some sort of loudness option on the HU though. As you turn it up, the loudness is reduced until it is no longer present. This prevents you from over playing the bass content when the volume is adequate to provide adequate bass on it&#039;s own.Check out this section of the pioneer manualBass Management: The Pioneer receiver offers Bass Management through its D.Bass (Dynamic Bass) and Loudness feature. D.Bass boosts the bass level dynamically to offer an effect as if a subwoofer was added to the system. D.Bass can be set to High, Low, or Off. The Loudness function compensates for deficiencies in the low- and high-frequency ranges at low volume. You can set the Loudness to High, Mid, Low, or Off.</blockquote>

[QUOTE="Doxquzme, post: 8876600, member: 689267"] The amp grounding at the same place as the head unit is not an issue if the grounding point is clean and bare. This may be a function of some sort of loudness option on the HU though. As you turn it up, the loudness is reduced until it is no longer present. This prevents you from over playing the bass content when the volume is adequate to provide adequate bass on it's own. Check out this section of the pioneer manual [B]Bass Management: [/B]The Pioneer receiver offers Bass Management through its D.Bass (Dynamic Bass) and Loudness feature. D.Bass boosts the bass level dynamically to offer an effect as if a subwoofer was added to the system. D.Bass can be set to High, Low, or Off. The Loudness function compensates for deficiencies in the low- and high-frequency ranges at low volume. You can set the Loudness to High, Mid, Low, or Off. [/QUOTE]

Verification