Reply to thread

Message

<blockquote data-quote="MakeshiftAudio" data-source="post: 6174117" data-attributes="member: 608963">Sweet. Let&#039;s see, are we talking about resonant RF amplifiers? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif If so, shoot me a PM.Not directed at g35x, supporting his statement, if you look at the (REAL) ampacity charts, you&#039;ll notice that they&#039;re based on the max rated insulation temperature. I believe that the standard grades are 75*C, 85*C, and 95*C, which is 167*F, 185*F, and 203*F respectively. I would consider that pretty hot, considering the last temperature is almost water&#039;s boiling point. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite7" alt=":p" title="Stick out tongue&nbsp; &nbsp; :p" loading="lazy" data-shortname=":p" />Yeah, it all boils down to length. When I bench my amps, I have 4/0 cables (I forget, something like 4-5&#039;, one run per rail) from my SMPS and battery bank, all the way to the point of a couple inches away from the amp which then goes into a reducer if needed or distro that I machined to allow it to hook to dual 12V power connectors if it is an amp that has dual inputs. (See AB VFL 400.1, Orion 2500D)Thanks for the praise, I hope you don&#039;t mind if I sig that, it&#039;s kinda cool being praised by you. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

[QUOTE="MakeshiftAudio, post: 6174117, member: 608963"] Sweet. Let's see, are we talking about resonant RF amplifiers? [IMG]//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif[/IMG] If so, shoot me a PM. Not directed at g35x, supporting his statement, if you look at the (REAL) ampacity charts, you'll notice that they're based on the max rated insulation temperature. I believe that the standard grades are 75*C, 85*C, and 95*C, which is 167*F, 185*F, and 203*F respectively. I would consider that pretty hot, considering the last temperature is almost water's boiling point. :P Yeah, it all boils down to length. When I bench my amps, I have 4/0 cables (I forget, something like 4-5', one run per rail) from my SMPS and battery bank, all the way to the point of a couple inches away from the amp which then goes into a reducer if needed or distro that I machined to allow it to hook to dual 12V power connectors if it is an amp that has dual inputs. (See AB VFL 400.1, Orion 2500D) Thanks for the praise, I hope you don't mind if I sig that, it's kinda cool being praised by you. [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] [/QUOTE]

Verification