Reply to thread

Message

<blockquote data-quote="somekindofhate" data-source="post: 4518309" data-attributes="member: 590594">First question has anyone on this board installed one of these?? Secondly I have the KVT 819 Flip out and it has a secondary unit as the brain, this is where the nav plugs into..I Wired everything as it said, i spliced into the wiring harness that i have connected to the HU so i knew i got the wires correct..Ground, Battery, Ignition, and then theres the parking brake wire.I am not sure what i need to do now, i grounded the parking wire because it was grounded on my HU (for dvd bypass)powered everything on and nothing changed on my SRC screen (no nav options). I am in my driveway, antenna on top of car. Sat a few mins, nothing changed.So reading over the manual again it didnt tell me to connect the parking brake wire.. so i disconnected it. tried letting it sit again and still nothing.Any suggestions? From what ive read it seems it takes a while to get thisthing to kick in or something? I do have some tree cover but its nothing crazy.. and what about the parking brake wire?Anyways, any suggestions would be great. I wish the G510 unit had some sort of power indicator on it - but its silent and no LED indicator on it at all.Like i said, only the 3 wires, spliced into the working wiring harness of the HU.Thanks ahead of time</blockquote>

[QUOTE="somekindofhate, post: 4518309, member: 590594"] First question has anyone on this board installed one of these?? Secondly I have the KVT 819 Flip out and it has a secondary unit as the brain, this is where the nav plugs into.. I Wired everything as it said, i spliced into the wiring harness that i have connected to the HU so i knew i got the wires correct.. Ground, Battery, Ignition, and then theres the parking brake wire. I am not sure what i need to do now, i grounded the parking wire because it was grounded on my HU (for dvd bypass) powered everything on and nothing changed on my SRC screen (no nav options). I am in my driveway, antenna on top of car. Sat a few mins, nothing changed. So reading over the manual again it didnt tell me to connect the parking brake wire.. so i disconnected it. tried letting it sit again and still nothing. Any suggestions? From what ive read it seems it takes a while to get this thing to kick in or something? I do have some tree cover but its nothing crazy.. and what about the parking brake wire? Anyways, any suggestions would be great. I wish the G510 unit had some sort of power indicator on it - but its silent and no LED indicator on it at all. Like i said, only the 3 wires, spliced into the working wiring harness of the HU. Thanks ahead of time [/QUOTE]

Verification