Reply to thread

Message

<blockquote data-quote="venom107" data-source="post: 222120" data-attributes="member: 543156">I&#039;ve decided that I&#039;m going to absolutely upgrade to a kicker 15L5 as long as I can get some questions answered. First off I can build a ported box but only if it slants because the max height for my box is 14inches. I can build a box with a maximum Cu Ft of 4.32 including the 3/4&quot; mdf. I plan on tuning the box to 39Hz. How can I slant the box to where its 4.32 Cu Ft slanted to where the front of the sub faces slightly up. I can go max of:14inches high24inches deep28inches wideAnybody have any ideas on how I can construct this box to where it will fit in my trunk? Also do you think 600rms is going to be enough to push this 15L5 to xmax? I was thinking that it would considering the box will be so large. I&#039;m not really sure what to do.//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif</blockquote>

[QUOTE="venom107, post: 222120, member: 543156"] I've decided that I'm going to absolutely upgrade to a kicker 15L5 as long as I can get some questions answered. First off I can build a ported box but only if it slants because the max height for my box is 14inches. I can build a box with a maximum Cu Ft of 4.32 including the 3/4" mdf. I plan on tuning the box to 39Hz. How can I slant the box to where its 4.32 Cu Ft slanted to where the front of the sub faces slightly up. I can go max of: 14inches high 24inches deep 28inches wide Anybody have any ideas on how I can construct this box to where it will fit in my trunk? Also do you think 600rms is going to be enough to push this 15L5 to xmax? I was thinking that it would considering the box will be so large. I'm not really sure what to do.[IMG]//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif[/IMG] [/QUOTE]

Verification