Reply to thread

Message

<blockquote data-quote="Kangaroux" data-source="post: 7625744" data-attributes="member: 628495">Nooo I mean that you want to attach the positive wire for your volt meter to something that is directly coming from the battery. The remote wire that comes out of your headunit isn&#039;t something that is direct from the battery, so the voltage may not be the same.On another note, I&#039;ve been doing some upgrades lately. As you guys know I swapped out my 2500 for a 2200, I also ordered a roll of 60mil b-stock from coleman (great stuff!) and as of a couple minutes ago ordered a Pioneer MVH-8200BT for a headunit upgrade. My alpine is good but because my ipod is newer the functionality is a bit off...random pausing, skipping, etc. I got the pioneer for a good price and one of my buddies has one and I love using it so it only seemed obvious that I get one for myself //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifDeadener will be going in soon enough, hopefully one of these days will be fairly warm and sunny out. I need to get me a roller first, though. I&#039;ll do a before/after of the deadener install to show you guys how much of an improvement there will be.My next plan for the build is to get some wire and hook up my rubicon 4 channel I have here. After that happens, I&#039;ll be picking up a good battery for the back and then I need to start saving up for a second 18. I don&#039;t want to dump $$ into an alt because they aren&#039;t exactly cheap, so I&#039;m just going to stick with one 2200 for now and run it at .5 (hence why I want to get the second battery). If funds allow, I&#039;ll swap out my 2200 for a 3500 so I have some more power on tap. Though I think I will just build the box to be efficient so I don&#039;t have to go that route (~7-8 cubes per sub, plenty of port area as well for extra output)</blockquote>

[QUOTE="Kangaroux, post: 7625744, member: 628495"] Nooo I mean that you want to attach the positive wire for your volt meter to something that is directly coming from the battery. The remote wire that comes out of your headunit isn't something that is direct from the battery, so the voltage may not be the same. On another note, I've been doing some upgrades lately. As you guys know I swapped out my 2500 for a 2200, I also ordered a roll of 60mil b-stock from coleman (great stuff!) and as of a couple minutes ago ordered a Pioneer MVH-8200BT for a headunit upgrade. My alpine is good but because my ipod is newer the functionality is a bit off...random pausing, skipping, etc. I got the pioneer for a good price and one of my buddies has one and I love using it so it only seemed obvious that I get one for myself [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] Deadener will be going in soon enough, hopefully one of these days will be fairly warm and sunny out. I need to get me a roller first, though. I'll do a before/after of the deadener install to show you guys how much of an improvement there will be. My next plan for the build is to get some wire and hook up my rubicon 4 channel I have here. After that happens, I'll be picking up a good battery for the back and then I need to start saving up for a second 18. I don't want to dump $$ into an alt because they aren't exactly cheap, so I'm just going to stick with one 2200 for now and run it at .5 (hence why I want to get the second battery). If funds allow, I'll swap out my 2200 for a 3500 so I have some more power on tap. Though I think I will just build the box to be efficient so I don't have to go that route (~7-8 cubes per sub, plenty of port area as well for extra output) [/QUOTE]

Verification