Reply to thread

Message

<blockquote data-quote="cory551" data-source="post: 6116940" data-attributes="member: 581836">Okay, I&#039;m pretty much a dummy when it comes to car systems, but this is my problem.I had a kicker zx750.1 amp, and 2 kicker comps, everything worked great until the subs blew.Now, I bought two pioneer premier&#039;s that im going to just install myself, since everything is already wired in my car and all I have to do is wire the subs in the box.I don&#039;t understand OHM&#039;s at ALL.The question is, how do I wire it? I went out and bought some 18 gauge speaker wire to bridge the subs since there DVC. Will this wire work?If that wire works, should I wire them like this? <a href="http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_2-ohm_mono.jpg" target="_blank">http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_2-ohm_mono.jpg</a>Here&#039;s a drawing of how it was hooked up previously, and how I plan on doing it.<a href="http://i32.tinypic.com/a5keix.jpg" target="_blank">http://i32.tinypic.com/a5keix.jpg</a>Basically, just tell me if this is what I should do or not, or can I just keep the wires the way they are (two in each terminal on the amp) and bridge the subs like in the picture?help!</blockquote>

[QUOTE="cory551, post: 6116940, member: 581836"] Okay, I'm pretty much a dummy when it comes to car systems, but this is my problem. I had a kicker zx750.1 amp, and 2 kicker comps, everything worked great until the subs blew. Now, I bought two pioneer premier's that im going to just install myself, since everything is already wired in my car and all I have to do is wire the subs in the box. I don't understand OHM's at ALL. The question is, how do I wire it? I went out and bought some 18 gauge speaker wire to bridge the subs since there DVC. [B]Will this wire work?[/B] If that wire works, should I wire them like this? [URL="http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_2-ohm_mono.jpg"]http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_2-ohm_mono.jpg[/URL] Here's a drawing of how it was hooked up previously, and how I plan on doing it. [URL="http://i32.tinypic.com/a5keix.jpg"]http://i32.tinypic.com/a5keix.jpg[/URL] Basically, just tell me if this is what I should do or not, or can I just keep the wires the way they are (two in each terminal on the amp) and bridge the subs like in the picture? help! [/QUOTE]

Verification