Reply to thread

Message

<blockquote data-quote="stylez777" data-source="post: 4907781" data-attributes="member: 575311">Actually the amp is a 5 channel Earthquake 900w.5 model.&nbsp;&nbsp; I am only using the front and sub RCAs and left out the rear ones since i wasn&#039;t going to use rear speakers.&nbsp; On the amp iteslf it doesn&#039;t label which speaker terminal is channel 1 or 2 or 3 or 4.&nbsp; Actually here is a picture <img src="http://img360.imageshack.us/img360/5989/50963465ta1.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /> where the red arrow is (hard to see it cutoff a bit) that is the sub terminal then the one with the black box around it is for the speakers, but again no indication which channel is which.&nbsp; Come to think of it, my speaker wire is in the 2 preceding the sub input those possibly could be the rear channels and that why i&#039;m not getting any sound.&nbsp; I&#039;m gonna switch them around see what happens.On a side note, if i wanted to bridge the 4 channels would i have to have the rear RCA&#039;s hooked up from the HU to the amp for that to work?&nbsp; (just curious)</blockquote>

[QUOTE="stylez777, post: 4907781, member: 575311"] Actually the amp is a 5 channel Earthquake 900w.5 model. I am only using the front and sub RCAs and left out the rear ones since i wasn't going to use rear speakers. On the amp iteslf it doesn't label which speaker terminal is channel 1 or 2 or 3 or 4. Actually here is a picture [IMG]http://img360.imageshack.us/img360/5989/50963465ta1.jpg[/IMG] where the red arrow is (hard to see it cutoff a bit) that is the sub terminal then the one with the black box around it is for the speakers, but again no indication which channel is which. Come to think of it, my speaker wire is in the 2 preceding the sub input those possibly could be the rear channels and that why i'm not getting any sound. I'm gonna switch them around see what happens. On a side note, if i wanted to bridge the 4 channels would i have to have the rear RCA's hooked up from the HU to the amp for that to work? (just curious) [/QUOTE]

Verification