Reply to thread

Message: <blockquote data-quote="Ali1" data-source="post: 1862216" data-attributes="member: 567924"><p>ok, maybe i confused you guys. I did the DMM procedure at volume 26/35. Took out the leads, put in the subs. The amp still clips at 26 volume. That's my point. I actually know two people that own the hercules with type Rs, and they are still fine. I am not worried about blowing them because their cheap(as in price). As long as i don't keep a clipped signal, i think i should be fine. This is because my ohm load after box rise, turns out to be 1.4-1.5 ohms. My Real Question is why does my clip at the volume i used to set the gains. For instance, i used the DMM procedure at volume 35. I still got clipping at 35 even though i set my volts at 44.1.  So i tried volume 30/35, same thing. I still get clipping at volume 30, even at 29. So i tried the DMM procedure at volume 26/35 and guess what? I still got clipping at volume 25, 26. WHYYYYY? Someone help.</p></blockquote><p></p>

Top