Reply to thread

Message: <blockquote data-quote="Ali1" data-source="post: 1858887" data-attributes="member: 567924">ok, so i installed my herc. today with my two type Rs. Let me just say this: my Type Rs were dissapointed, lol. As soon i turned up the volume, i automatically smelled the voice coils. My immediate response was "fukkk". But i checked my ohmload at the amp, and it showed the usual, 1.4-1.5 ohms. BTW, It's a nasty smell. Gains are set between 1/2 and 3/4. Bass EQ set at the minimum(30hz). Bass Boost off. Bass is at -7, BBE is off. Now, that i gave you the low-down, i need some help.My amp shows a clipping signal when volume is at 34-35. Is it because the HU clips at 35? Should i do the gains Setup at level 32 instead of 35.? I know the tutorial says 3/4, but i wanna use my HU to the fullest or close to the fullest.The subs don't smell anymore. It just smelled like that when i first powered my amp.</blockquote>

Top