Reply to thread

Message: <blockquote data-quote="da12b" data-source="post: 603056" data-attributes="member: 548763">This is the way I would do it.  From the Battery, run a 4 ga. power cable into an 125amp ANL inline fuse (within 18 in. from the battery), then to a fused distribution (used for 2 amps).  I would get one that has one 4 ga. in and two 8 ga. out.  I would use a 60 amp AGU glass fuse or an blade type fuse.  Run two 8 ga. power cables to each amp.  That's it for the power cable.I hope this helps.</blockquote>

Top