Reply to thread

Message

<blockquote data-quote="req" data-source="post: 521613" data-attributes="member: 555713">ok here is the deal. RE said the box (what the sub sees) should be 1.2cu. i HAVE NOT MADE THIS YET.he also said that the port should be 37hz.i want to make the port FIRST... this is kinda what i want it to look like<img src="http://www.asterixband.com/andy/trunk.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" />i want to build the BASE of the enclosure and the PORT from .375&quot; MDF, then construct the fiberglass relief of the trunk corner. then stretch the fleece over the port and the relief. at this point, i will measure the internal volume, and add &#039;volume filler&#039; to get it to 1.2cuft AFTER port displacement. my trunk is almost empty, and im sure i can fit a 1.2cuft+port in there no problem. i want the sub to see the 1.2cubes.so i DO NOT have any of the enclosure made already. i want to have a port made before i start glassing.hence, i just need the dimensions of a port tuned to 37hz with 1.2cuft of space. as the picture looks, the port CAN stick out, and i want it short and long\wide like people usually do with bigger rectangular boxes and the port that goes up the whole side.i hope that picutre helps. mine will only have 1 sub tho, if this works, i am going to build that setup for a friend.so. can anyone fill me in on how to make a slot port BEFORE i even mess with the box..375&quot; mdf11xmax1.2cubes37hz.14 cubes driver displacement</blockquote>

[QUOTE="req, post: 521613, member: 555713"] ok here is the deal. RE said the box (what the sub sees) should be 1.2cu. i HAVE NOT MADE THIS YET. he also said that the port should be 37hz. i want to make the port FIRST... this is kinda what i want it to look like [IMG]http://www.asterixband.com/andy/trunk.gif[/IMG] i want to build the BASE of the enclosure and the PORT from .375" MDF, then construct the fiberglass relief of the trunk corner. then stretch the fleece over the port and the relief. at this point, i will measure the internal volume, and add 'volume filler' to get it to 1.2cuft AFTER port displacement. my trunk is almost empty, and im sure i can fit a 1.2cuft+port in there no problem. i want the sub to see the 1.2cubes. so i DO NOT have any of the enclosure made already. i want to have a port made before i start glassing. hence, i just need the dimensions of a port tuned to 37hz with 1.2cuft of space. as the picture looks, the port CAN stick out, and i want it short and long\wide like people usually do with bigger rectangular boxes and the port that goes up the whole side. i hope that picutre helps. mine will only have 1 sub tho, if this works, i am going to build that setup for a friend. so. can anyone fill me in on how to make a slot port BEFORE i even mess with the box. .375" mdf 11xmax 1.2cubes 37hz .14 cubes driver displacement [/QUOTE]

Verification