Reply to thread

Message

<blockquote data-quote="kramer_212" data-source="post: 7550895" data-attributes="member: 634722">If i read your post right personally since that pdx is only 2 and 4 ohms stable i would personally get two svc 4 ohm woofers, also find how to correctly set gains, using a ddm if you don&#039;t own a oscilloscope, reason being the level the gain is at really means nothing having it all the way down defiantly helps against the likely hood of sending a clipped signal. also using the sub pre out just sets it so you can adjust the lpf separably, and usually cuts the higher freqs off.good luck. ---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ---------- this is a bold statement have any reasoning behind it? ( not saying i agree or disagree)</blockquote>

[QUOTE="kramer_212, post: 7550895, member: 634722"] If i read your post right personally since that pdx is only 2 and 4 ohms stable i would personally get two svc 4 ohm woofers, also find how to correctly set gains, using a ddm if you don't own a oscilloscope, reason being the level the gain is at really means nothing having it all the way down defiantly helps against the likely hood of sending a clipped signal. also using the sub pre out just sets it so you can adjust the lpf separably, and usually cuts the higher freqs off. good luck. [COLOR=Silver] [/COLOR] [COLOR=Silver][SIZE=8px]---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------[/SIZE][/COLOR][SIZE=8px][/SIZE] [COLOR=Silver] [/COLOR] this is a bold statement have any reasoning behind it? ( not saying i agree or disagree) [/QUOTE]

Verification