Reply to thread

Message

<blockquote data-quote="thepremier" data-source="post: 6489134" data-attributes="member: 567078">Hello,Unfortunately I had my car broken into recently, and the theives were able to get away with my JL Audio 1000/1 amp.Luckily I had a JL Audio 500/1 amp sitting around the house, so I am just using this until I replace it with another 1000/1 amp.Now I&#039;m confused about how to actually get everything working once again because my Sub doesn&#039;t work after connecting/wiring the amp.Everything is going to the right places as far as the Ground, Power, And Remote wiring. There is power going to the amp because the Green Light Power indicator lights up on the amplifier.I don&#039;t know what I am missing in this whole equation. The pic that I have included shows how the amp is currently wired. I am not sure if there are supposed to be AV Jacks going into the &quot;Preamp Output Section.&quot; There don&#039;t seem to be any other wires that are not being used or connected, so I am unsure at this point what could be the issue.I also checked the connectors on the Subwoofer, and everything looks good. I also checked all the connections with the head unit, and everything looks fine as well.If anybody could help me with this issue, it would be greatly appreciated.Thanks</blockquote>

[QUOTE="thepremier, post: 6489134, member: 567078"] Hello, Unfortunately I had my car broken into recently, and the theives were able to get away with my JL Audio 1000/1 amp. Luckily I had a JL Audio 500/1 amp sitting around the house, so I am just using this until I replace it with another 1000/1 amp. Now I'm confused about how to actually get everything working once again because my Sub doesn't work after connecting/wiring the amp. Everything is going to the right places as far as the Ground, Power, And Remote wiring. There is power going to the amp because the Green Light Power indicator lights up on the amplifier. I don't know what I am missing in this whole equation. The pic that I have included shows how the amp is currently wired. I am not sure if there are supposed to be AV Jacks going into the "Preamp Output Section." There don't seem to be any other wires that are not being used or connected, so I am unsure at this point what could be the issue. I also checked the connectors on the Subwoofer, and everything looks good. I also checked all the connections with the head unit, and everything looks fine as well. If anybody could help me with this issue, it would be greatly appreciated. Thanks [/QUOTE]

Verification