Reply to thread

Message: <blockquote data-quote="helotaxi" data-source="post: 4172845" data-attributes="member: 550915">They'll be "properly" powered.  By the time you account for power compression, impedance rise etc. they'll be doing as well on that amp as you hope.Your "half-assed" calculations are wrong also.  Power vs. impedance is not a linear function.  1.5 ohms is not half way between 1 and 2 ohms.  Since that amp doesn't double power between going from 2 to 1 ohms, getting even really in the ballpark of what it would be rated at is impossible.  I would figure the 2 ohm number is going to be pretty close to what you'll actually get.  Again, not something that I'd get wrapped up about.</blockquote>

Top