Reply to thread

Message: <blockquote data-quote="squeak9798" data-source="post: 575561" data-attributes="member: 555320">Yup.  Even if the signals are different (say the amp does have two gains and they aren't set right), nothing bad will happen.Depends on a lot of things.  There may be nothing different.  But, for example, my old Eclipse 34230 was only stable to 4ohm/channel, and could not be bridged.  So, there is the perfect opportunity to run one channel per coil on a dual 4ohm/coil sub.  Or, if you have a dual 4ohm/coil sub and a 2-channel amp that can't be bridged to 2ohm, you may get more power out of it by running 1 coil per channel instead of running the amp bridged at 8ohm</blockquote>

Top