Reply to thread

Message: <blockquote data-quote="JuicyJeff" data-source="post: 7294113" data-attributes="member: 613666">Ok so I have been listening to dubstep lately which is pretty hard on subs so I figured I would give it a good tune with my dmm.  Anyways, I first set my dmm to ohms and tested the resistance of the leads, which was .4-.5 ohms of resistance.  I put it on the pos and neg on the back of my box and it read an even 2 ohms, which would be 1.6-2 ohms.  Its wired at 1, is this normal?what tone should I tune with, I see some saying 50, some say 60, some say -3 some say 0And finally, I tuned it to 30v with a 50,Hz 0db tone and truned lpf up to about 80 and the subs are barely moving.  What can I do</blockquote>

Top