Reply to thread

Message: <blockquote data-quote="shredder1" data-source="post: 8579845" data-attributes="member: 658920"><p>That's weird... I remember a local guy that had a RF800.4 and ran it bridged on a set of channels then later had the same problem in another install... I'm not an amp technician but it turns out that he damaged something running it bridged in the first install... it was at like 2.66 ohm... anyways the fix was not too bad... $75 from a tech in Tucson... Probably not YOUR problem but it does sound the same.</p></blockquote><p></p>

Top