Reply to thread

Message

<blockquote data-quote="TheeyaN" data-source="post: 6172852" data-attributes="member: 604413">MB Quart RAA2400.Separate chanals (2 gain knobs)My right chanell didnt work,so i took it to a service and they &#039;&#039;fixed&#039;&#039; it.I tried it out on my Alpine R type components and man it sounded good,everything was working just fine,but when i connected it to my sub it sounded like pure crap.Its rated 2x200 @ 4ohms,and&nbsp; 800 rms @4ohms brigded.The thing is when i conected my sub i think only one channel is working,and i measured with my DMM and it said 27-28 V,and it should have said 56.6Also when i measure separate chanells the good chanell starts with about 14V i think,and the bad chanell starts with 0VThe good chanell goes up until 55V i think,but heavily clipped,and the bad chanel&#039;s max is about 7V,and no where near clipping.I am very very very confused,it doesnt turn the right clip lamp ON when connected to a sub or a DMM,but when connected to the speakers it does..Any sugestions?:| :| :|</blockquote>

[QUOTE="TheeyaN, post: 6172852, member: 604413"] MB Quart RAA2400. Separate chanals (2 gain knobs) My right chanell didnt work,so i took it to a service and they ''fixed'' it. I tried it out on my Alpine R type components and man it sounded good,everything was working just fine,but when i connected it to my sub it sounded like pure crap. Its rated 2x200 @ 4ohms,and 800 rms @4ohms brigded. The thing is when i conected my sub i think only one channel is working,and i measured with my DMM and it said 27-28 V,and it should have said 56.6 Also when i measure separate chanells the good chanell starts with about 14V i think,and the bad chanell starts with 0V The good chanell goes up until 55V i think,but heavily clipped,and the bad chanel's max is about 7V,and no where near clipping. I am very very very confused,it doesnt turn the right clip lamp ON when connected to a sub or a DMM,but when connected to the speakers it does.. Any sugestions? :| :| :| [/QUOTE]

Verification