Reply to thread

Message: <blockquote data-quote="johnnyvolcom5" data-source="post: 7682877" data-attributes="member: 605736"><p>So i finally finished my doors last night and they now have some HAT Unity 6.5s in them.  I hooked them up bridged to my Arc KS 300.4 according to the Arc manual.  When i busted out the DMM to check voltage, the amp was at a steady 14.2 but when i tested at the speaker wire i got 30 volts on one set and 15 volts on the other.  i tested at amp and crossovers and same 30 for one and 15 for the other.  It doesnt sound like one side is playing louder than the other, and i am 100% positive i followed the Arc manual correctly as to setting it up bridged....so what the heck, shouldnt they both be the same?</p></blockquote><p></p>

Top