Reply to thread

Message

<blockquote data-quote="pioneer9412" data-source="post: 7127566" data-attributes="member: 624869"><p>I just turned 16 and got my license.&nbsp; I&#039;m driving a 2002 Accord it has a stock 105 amp alternator. This is what I am getting ready to order for my setup. Please tell me how you think this will work out the way its wired. First off I&#039;m starting off with a Sony WX-GT77UI head unit. For the front doors I&#039;m getting Rockford Fosgate Punch P1S652(55 watts rms). For the rear Rockford Fosgate P1692(75 watts rms). For the tweeters Rockford Fosgate PRIME R1T-S (40 watts rms). They&#039;re going to be wired at 4 ohms to a Hifonics HFi55.4 amp(55 watts rms x4) with 14 gauge wire. For my bass I&#039;m ordering a Hifonics Brutus BRZ1700.1D with two Audiobahn AW1206t subs( 1100 watts rms) wired down to 1 ohm. I&#039;m ordering 25ft of tsunami 1/0 gauge wire to do the big 3 and run power to both amps. The HFi55.4 amp already has fuses built in so I&#039;m just getting a 160amp circuit breaker for the brutus. Also I&#039;m ordering a Kinetik HC 1800 battery. I don&#039;t have to run a remote wire or rcas because they came stock in my car. Please tell me if you see any reason why this won&#039;t work.</p></blockquote><p></p>

[QUOTE="pioneer9412, post: 7127566, member: 624869"] I just turned 16 and got my license. I'm driving a 2002 Accord it has a stock 105 amp alternator. This is what I am getting ready to order for my setup. Please tell me how you think this will work out the way its wired. First off I'm starting off with a Sony WX-GT77UI head unit. For the front doors I'm getting Rockford Fosgate Punch P1S652(55 watts rms). For the rear Rockford Fosgate P1692(75 watts rms). For the tweeters Rockford Fosgate PRIME R1T-S (40 watts rms). They're going to be wired at 4 ohms to a Hifonics HFi55.4 amp(55 watts rms x4) with 14 gauge wire. For my bass I'm ordering a Hifonics Brutus BRZ1700.1D with two Audiobahn AW1206t subs( 1100 watts rms) wired down to 1 ohm. I'm ordering 25ft of tsunami 1/0 gauge wire to do the big 3 and run power to both amps. The HFi55.4 amp already has fuses built in so I'm just getting a 160amp circuit breaker for the brutus. Also I'm ordering a Kinetik HC 1800 battery. I don't have to run a remote wire or rcas because they came stock in my car. Please tell me if you see any reason why this won't work. [/QUOTE]

Verification