Reply to thread

Message

<blockquote data-quote="Umbra" data-source="post: 8422390" data-attributes="member: 658055">Alright, I&#039;ve got a design and I&#039;m pretty sure it should work out well enough, but I have two concerns:<img src="http://i.imgur.com/3LxDA4V.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />The second view is an overhead and the first is head-on. One port is above the other and they turn in opposite directions.I know you&#039;re supposed to keep port openings away from walls. Is that only when the port is facing the wall, or should that also apply when the port is alongside it?Is the opening inside the box in an okay spot relative to the subs? I don&#039;t know much about the guidelines here. I think it&#039;s supposed to be out of the way.I&#039;m sorry the MS paint sketch is ****. Hopefully you get a chuckle of it.These are the only two potential issues I see. If you can lend some insight, please do, otherwise I&#039;m going to go ahead and build it tomorrow.</blockquote>

[QUOTE="Umbra, post: 8422390, member: 658055"] Alright, I've got a design and I'm pretty sure it should work out well enough, but I have two concerns: [IMG]http://i.imgur.com/3LxDA4V.jpg[/IMG] The second view is an overhead and the first is head-on. One port is above the other and they turn in opposite directions. I know you're supposed to keep port openings away from walls. Is that only when the port is facing the wall, or should that also apply when the port is alongside it? Is the opening inside the box in an okay spot relative to the subs? I don't know much about the guidelines here. I think it's supposed to be out of the way. I'm sorry the MS paint sketch is ****. Hopefully you get a chuckle of it. These are the only two potential issues I see. If you can lend some insight, please do, otherwise I'm going to go ahead and build it tomorrow. [/QUOTE]

Verification