Reply to thread

Message: <blockquote data-quote="ebrunn" data-source="post: 3190802" data-attributes="member: 572167"><p>Your rca's have the remote turn on wire included with them from what I read so all you have to do is strip off about an half an inch off the remote turn coming from the rca's and do the same for the blue/white wire coming off the Eclipse.  Make sure you don't use the blue wire off the Eclipse because that is for the radio antenna.  Use the blue one with the white stripe. Either solder or crimp that connection, and cover it with electrical tape.  Then strip about the same amount off the end of the remote turn on wire that is at the other end of the rca cable and connect that to the remote turn on terminal on the amp.  Then you should be good to go.</p></blockquote><p></p>

Top