Reply to thread

Message

<blockquote data-quote="skrilla22" data-source="post: 3419439" data-attributes="member: 579746">Ok I started my first install yesterday and it&#039;s going errm.. ok. I ran the power wire throught the grommet through the firewall under the carpet, and removed the old factory stereo. I&#039;m having trouble finding the right wiring harness, so i&#039;m going to buy the right one this time and try again tomorrow. Since i&#039;m running just 1 amp as of now, I just need to connect 1 input/1 output to the headunit from the amplifer correct? I don&#039;t think i have a remote output lead wire to connect that to the amplifier, or am i missing something..? what does it looks like?As for wiring the subwoofer to the amplifier, parallel will give me 0.5 ohms, and series will give me 2 ohms. How exactly does the wiring go if i wanted to run it at2 ohms?And one more thing, I need help with the Kicker ANL Fuse Holder Distro Block Thingy that came in the amp kit. The holes on each end look to small to fit 1/0 thru so would i bring the brass screw up and put the 1/0 ring terminal on each end of the fuse? Since i&#039;m only running one amp, I would ignore the holes on the end?Sorry for all the newbie questions, I want to finish my install tomorrow. Thanks for your help.</blockquote>

[QUOTE="skrilla22, post: 3419439, member: 579746"] Ok I started my first install yesterday and it's going errm.. ok. I ran the power wire throught the grommet through the firewall under the carpet, and removed the old factory stereo. I'm having trouble finding the right wiring harness, so i'm going to buy the right one this time and try again tomorrow. Since i'm running just 1 amp as of now, I just need to connect 1 input/1 output to the headunit from the amplifer correct? I don't think i have a remote output lead wire to connect that to the amplifier, or am i missing something..? what does it looks like? As for wiring the subwoofer to the amplifier, parallel will give me 0.5 ohms, and series will give me 2 ohms. How exactly does the wiring go if i wanted to run it at 2 ohms? And one more thing, I need help with the Kicker ANL Fuse Holder Distro Block Thingy that came in the amp kit. The holes on each end look to small to fit 1/0 thru so would i bring the brass screw up and put the 1/0 ring terminal on each end of the fuse? Since i'm only running one amp, I would ignore the holes on the end? Sorry for all the newbie questions, I want to finish my install tomorrow. Thanks for your help. [/QUOTE]

Verification