Reply to thread

Message

<blockquote data-quote="tytler32u" data-source="post: 7365799" data-attributes="member: 633161">I am partaking a huge (for me) install this weekend. I have an 03 Navigator, when I bought it , the guy had some wires run already. I threw my JL10W7 with a JL 500/1 using his ****** RCAs and some 8 gauge he had run. Since then I have acquired the following for this install. Kicker 4 gauge kit and a distro block, I had some good Monster RCAs. a Pioneer AVH-P3300BT double din for the HU. MA RK6 comps for the front with a RF T600.4 to run those. Also a 24&quot; flip down monitor to replace the factory 7&quot;. Metra Harness and dash kit.My questions are..Am I going to have issues running the stock 6x8s in the rear door and the 8&quot; sub in the rear?Do I have to run all the wires from the flip down to the HU, or can I use the factory stuff that is there?I will be running a power inverter to play an xbox in the back. With the JL and RF amp plus everything else am I going to strain the electrical too much?Any suggestions or tips? I have done some basic single din and amp sub set ups. This will be my first attempt at highs and all the entertainment ****.Thanks in advance</blockquote>

[QUOTE="tytler32u, post: 7365799, member: 633161"] I am partaking a huge (for me) install this weekend. I have an 03 Navigator, when I bought it , the guy had some wires run already. I threw my JL10W7 with a JL 500/1 using his ****** RCAs and some 8 gauge he had run. Since then I have acquired the following for this install. Kicker 4 gauge kit and a distro block, I had some good Monster RCAs. a Pioneer AVH-P3300BT double din for the HU. MA RK6 comps for the front with a RF T600.4 to run those. Also a 24" flip down monitor to replace the factory 7". Metra Harness and dash kit. My questions are.. Am I going to have issues running the stock 6x8s in the rear door and the 8" sub in the rear? Do I have to run all the wires from the flip down to the HU, or can I use the factory stuff that is there? I will be running a power inverter to play an xbox in the back. With the JL and RF amp plus everything else am I going to strain the electrical too much? Any suggestions or tips? I have done some basic single din and amp sub set ups. This will be my first attempt at highs and all the entertainment ****. Thanks in advance [/QUOTE]

Verification