Reply to thread

Message: <blockquote data-quote="statikuz" data-source="post: 96922" data-attributes="member: 545888">You probably already know this, but a good place to ground your system is a seat-belt bolt... there should be one relatively close to where you're installing your amps. Unscrew the bolt, crimp a ring terminal to the end of your ground wire, add a star washer, and bolt the whole thing back together... just be sure to tighten the bolt back up to factory specs.Also, when you ground it, the terminal has to be touching the bare metal of your vehicle chassis, no fiberglass... and make sure that you scrape away all paint/rust/crap from the ground point....Good luck... =)</blockquote>

Top