Reply to thread

Message: <blockquote data-quote="M3gamervenom" data-source="post: 8523977" data-attributes="member: 671041"><p>I've got a friend who's system(which i installed) is having what I believe is a protect mode issue....I'm not new to installing this stuff, and be probably put in 8 full systems and not had a single problem outof any of them, but this is probably the 4th sub I've put in his 08 impala that's had issues...it's Kenwood x500-1 amp (500 on 2 ohms/300 on 4) and he's got two pioneer champions which are 300rms 4 ohm per. This setup worked fine for two months, now Everytime he turns his car on, works for about 5 min, shuts off. Turns off car, sits for 5 back on, same thing, got them wired in inline so the amp should be reading the 2 ohms and giving me the 500rms. The ground is good, and has been sanded down to metal, it's tight..all connections are good...not sure where to turn next</p></blockquote><p></p>

Top