Reply to thread

Message: <blockquote data-quote="audioholic" data-source="post: 8677053" data-attributes="member: 549629"><p>Mixing sub sizes, unless you really really know what you are doing, is usually a bad idea. And almost always the worst way to fix a problem with frequency response. To do it properly it would require significant processing, a lot of testing, and getting a bit lucky. Four 10's is plenty of cone area to get solid output down to 20hz, unless the enclosure design doesn't allow them to, or enclosure location/firing direction is causing problems.. Check your box alignment and position before just tossing a 15 in the mix too. Id suggest either altering the four 10" setup you have now, or replace it entirely with a different setup that has the frequency response you are looking for.</p></blockquote><p></p>

Top