Reply to thread

Message: <blockquote data-quote="dkguitarist" data-source="post: 2023804" data-attributes="member: 557124">ok so i got my 20.1 and 13w7 hooked up and everything. i turn on my radio, and turn the subwoofer on, and my amp's power light isn't coming on.i just now went outside and measured the votage everywhere, and i was around 12V at the battery, the circuit breaker, my distro, and even at the power input on the amp. i then measured the REM terminal and it wasn't registering.so i pull the headunit out, and measure the remote line at the HU and i didn't get a reading. when i did it was like 2 or so.i didn't measure the pre-amps output signals, but would those cause the amp not to turn on as well or what?i need some ideas guys. thanks.</blockquote>

Top