Reply to thread

Message

<blockquote data-quote="BassAddictJ" data-source="post: 7048599" data-attributes="member: 560415">I DID a few days ago.hopefully this week ill be able to put it in.there&#039;s a slight challenge with mounting it. each side slides a little bit onto the amp chasis....so instead of just stick it between the two amps and securing the spacer with sticky tape and a piece of wood underneith like i originally thought, i need to get some kind of baffle for both amps and spacer to mount all 3 together. I&#039;ll have to secure one of the amp from the bottom of the board (since the moutning feet will be covered by the spacer. i&#039;ll do a little measureing and pre drill some holes that I can try to get some bolts into. hopefully i can get flat ended bolt heads or drill alittle into the baffle so that the nut or bolt on the bottom isnt protruding and causing issues with the baffle being mounted to my sub box. mounting to the sub box obviously isnt ideal but i have noooo space in there.plus having the mounting baffle I can cut a small section out near the back to run the wires out through.....instead of cutting holes in the sub box and runing them through there.ill keep you guys posted.</blockquote>

[QUOTE="BassAddictJ, post: 7048599, member: 560415"] I DID a few days ago.hopefully this week ill be able to put it in. there's a slight challenge with mounting it. each side slides a little bit onto the amp chasis....so instead of just stick it between the two amps and securing the spacer with sticky tape and a piece of wood underneith like i originally thought, i need to get some kind of baffle for both amps and spacer to mount all 3 together. I'll have to secure one of the amp from the bottom of the board (since the moutning feet will be covered by the spacer. i'll do a little measureing and pre drill some holes that I can try to get some bolts into. hopefully i can get flat ended bolt heads or drill alittle into the baffle so that the nut or bolt on the bottom isnt protruding and causing issues with the baffle being mounted to my sub box. mounting to the sub box obviously isnt ideal but i have noooo space in there. plus having the mounting baffle I can cut a small section out near the back to run the wires out through.....instead of cutting holes in the sub box and runing them through there. ill keep you guys posted. [/QUOTE]

Verification